 |
1-800-648-6370 |
Fax: 713-699-9527 11006 E Sam Houston Parkway North Houston ,TX 77044 |
|
| Specialists in Structural Steel & Sheet Metal Fabricating Equipment, Tooling, and Parts | |
Metal Muncher Ironworker Accessories
 |
 |
 |
 |
New Style Gauging table |
Press Production Table |
Structural Die Blocks |
Standard 4-Way Brake Set |
| With 9/16" slot in upper & lower to accommodate press brake tooling. (tooling not included) | 16" x 36" std. Other sizes available. (Gauging table available-not shown) | Punch flanges and web on channel 3" thru 8" wide 1 1/4" O.D. Die | Forms bends/lengths from 18" to 48" std. |
 |
 |
 |
 |
Special Brake Die Holder |
Pipe Notcher |
Pipe Shear |
Channel Shear |
| With 9/16" slot in upper & lower to accommodate press brake tooling. (tooling not included) | Sizes up to 3 1/2" O.D. / pipe and round & square tubing. | Shear and pinch pipe of tubing up to 2 1/2" O.D. | Cuts 2" to 8" standard channel /mild steel (70 ton models and larger) |
 |
 |
 |
 |
Mitering Angle Shear |
Rod Shear |
Shear Point (Picket) Tooling |
Adjustable Work-Support Rollers |
| Shear angles up to 6" x 6 1/2" at 90 degrees and 5" x 5" x 1/2" at 45 degrees. (70 ton models and larger) |
Fit on each end of press table (70 ton models and larger) |
 |
 |
 |
 |
Over-Sizes 28xx & Special Punches and Dies |
Portable Work Lamp |
Hy-Performance Blade |
Copper-Notcher Production Plate |
| Up to 6" diameter and large | 24" Gooseneck lamp with magnetic base | Increases flat bar shearing capacity to 3/8" x 24" on 70 ton models and larger | Material support table with squaring arm 18" x 18" |
 |
||
Flat Bar Production Plate |
Casters |
Special Tooling |
| Material support table with squaring arm 12" x 24 " |
Casters are available for most models | Special tooling is available on request. |
Copyright 2008 Fabricating Equipment Company