FMB Band Saw: Orion Manual Bandsaw
FMB Band Saws: Standard Features
  • Cuts from 0° to 60° right and 45° left
    (Manual/Gravitational for version +G).
  • Head structure in special aluminium casting alloy
  • Dynamometric blade tensioning
  • Blade cleaning brush integrated in the head protection cover.
  • Head handgrip with integrated cycle button.
  • Blade guide with combined action of side bearings, carbide plates and top bearing.
  • Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Mechanical variator 20÷100 m/min for version +V).
  • Wide table for material support, material clamping vice with manual positioning and fast clamping system.
  • Ergonomic working table and control panel.
  • Head rotation angle stop at 0°,45° and 60°.
  • Degrees measuring system, graduated scale and rugged in construction locking lever.
  • Millimetric reference length stop measuring system.
  • Cutting length 0÷600 mm.
  • Heavy duty basement.
  • Sheet metal construction in different thickness, chips holding sides.
  • Front door with key locking.
  • Hydraulic cooling pump with 20 l capacity tank for feeding both blade guides.
  • Electrical cabinet with 24VAC, main switch, safety unit and electric drives.
  • Protection level IP 55.
  • Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph - 230V/50Hz/3 - 110V/60Hz/1Ph - 220V/60Hz/3Ph - 440V/60Hz/3Ph - 575V/60Hz/3Ph available)






For more information on the FMB Orion Bandsaw, or any other Band Saws please give us a call at (800)648-6370

FMB Orion Manual Band Saw
FMB logo
FMB Orion
Manual Bandsaw
Related Models: Bandsaws
FMB Manual Bandsaws
Antares Bandsaw
Minor Bandsaws
Orion Copernico Saws
Pegasus-G Metal Cutting Saw
Phoenix Saw
Titan Manual Bandsaw
Triton Manual Band Saw
FMB Semi Automatic Metal Cutting Saws
FMB Automatic Band Saws
Scotchman Bandsaws
Hydmech Band Saws
Peddinghaus Structural Bandsaws