Baileigh Bender: RDB-200Baileigh Rotary Draw Bender
Standard Features
  • Programmable electric tubing bender
  • Maximum capacity is 1.5 inch Schedule 40 pipe, 1-1/2 inch square, 2 inch tube (depending on wall thickness).
  • To program a bend on the Model 200 pipe bender, simply turn the degree hand wheel to the desired bend angle (include spring back). When performing a bend, the die head automatically stops at the degree indicated on the numerical counter. Allows for accurate repeatability when performing one or multiple bends. RDB pipe benders are extremely easy to program.
  • Remote operator interface is standard on this pipe bender.
  • The Model 200 square tubing bender is equipped with a lead screw indicator that ensures repeatable counter die positioning for multiple bends.
  • Like on all RDB square tubing benders, the bend can be advanced after stopping machine, saves on set up cost (material savings).
  • Maximum bend is 180 degrees (machine limit is 202 degrees).
  • Maximum CLR is 9 inch
  • Required power is 110V, Single-Phase, 20A, 60Hz
  • Approximately 510 lbs
  • Optional rotary positioning table allows for accurate bends in varying planes.
  • RDB tube benders are Made in America
For more information on the Baileigh Industrial RDB-200 Rotary Draw Pipe Bender, or any other Bailegh Pipe and Tube benders please give us a call at (800)648-6370








Baileigh RDB 200 Rotary Draw Bender
Bailiegh Industrial Logo
Baileigh Industrial
RDB-200 Rotary Draw Tube/Pipe Bender
RDB bender is the original inventor of these types of pipe benders that utilizes rotary compression bending in combination with rotary draw bending. Producing some of the best quality bends on a non-mandrel bending machine at a reasonable investment. Bend up to 206 degrees without stopping or ratcheting. Bends pull out in seconds (no disassembly required). Fast cycle time. The M-150 hydraulic tubing bender has a maximum capacity of 2 inch Schedule 40 pipe, 2 inch square, and 2-1/2 inch tube. Auto-stop option for one bend programming. Bend can be advanced after stopping machine, saves on set up costs (material savings). This tube bender has a maximum CLR of 7 inch.
Related Models:
Baileigh RDB 500 Hydraulic Pipe Bender
Baileigh RDB 100 Manual Bender
Baileigh RDB 150 Hydraulic Bender
Baileigh RDB 300 Rotary Draw Bender
Baileigh RDB-MD- 350 Mandrel Bender
Baileigh RDB 350 Rotary Draw Bender