 |
1-800-648-6370 |
Fax: 713-699-9527 11006 E Sam Houston Parkway North Houston ,TX 77044 |
|
| Specialists in Structural Steel & Sheet Metal Fabricating Equipment, Tooling, and Parts | |
- Bends materials 3/8" to 3"
- Ideal for protoype or small production applications
- CLR as small as 1.5D
- NC programmable C Axis with manual
X&Y positioning - Ideal for bending thin wall mild steel, stainless steel,aluminum and other materials
- Programmable bend sequencing and mandrel retraction
- Independent clamp and pressure die adjustment
- Reinforced tool shaft with swing arm and tie bar support
- Micrometer wiper die adjustment
- Secondary hydraulic pressure die stabilization system
- Quick change tooling reduces set up time
- Tables available in 5', 10', and 20' lengths
- standard with pneumatic material clamping and DRO system for linear and rotational positioning
Ercolina MegaBender 030
3 Axis Mandrel Bender
Ercolina’s ® innovative patented mandrel system adapts easily to the Megabender ® without modification to produce high quality bends on tubes and hollow profiles when non-mandrel systems are no longer effective. Depending on material, wall thickness and distance between bends, the Ercolina ® mandrel system can accommodate centerline bend radii as small as 1.3 times external diameter on tube ranging from 3/8” to 3 ”.
Mandrel systems incorporate five separate tools to effectively support the profile during bending process. The five tools are center former, pressure die, clamping die, wiper die and internal mandrel, and are specific to each tube diameter. Traditional mandrel machines require high volume production to be cost effective. The Ercolina ® mandrel system is an inexpensive alternative to high volume systems making it ideal for prototypeor production runs up to 1000 bends daily.The Megabender ® main drive unit is electromechanical, improving reliability and further reducing cost and maintenance requirements associated with more expensive hydraulic systems. Our hydraulic system is simple and reliable, operating only the clamping die, pressure die and mandrel extractor. Ercolina’s ® standard micro-processor controls clamping, mandrel movement, bending speed, bending angle and material spring back compensation functions for true NC semi-automatic three axis operation. Mandrel tables are available in four different lengths to accommodate most applications.
.Related Models: Profile Bending Machines
Ercolina Gigabender GB140
Ercolina Gigabender GB170
Ercolina Megabender
Ercolina Megabender /w Mandrel
Ercolina Top Bender-TB60
Ercolina SB48 Pipe Bender
Ercolina Superbender 060
Ercolina MB42 Tube Bender
Ercolina MB42B Bench Top Bender
Ercolina Medibender 070 Bender
Ercolina 030 3 Axis Mandrel Bender
Ercolina ErcoBender 45 3 Axis CNC
Ercolina ErcoBender 65 3 Axis CNC
Ercolina lMac-A40/P Two Axis Positioner