Trumpf: TruMatic Series 3000 CNC Laser Cutting & Punching Machine
Trumpf TruMatic Series 3000 CNC Laser Cutting & Punching Machine
Work Range (X x Y)1
Combined punch/laser operation 85 x 50 in.
Punching Operation 98 x 50 in.
Laser Operation 98 x 50 in.
Capacities
Laser Output 2000 W
Max. sheet thickness 0.25 in.
Max. punching force 165 kN 18 tons
Max. work piece weight 120 kg 265 lbs.
Speed
x axis 3523 in /min
Y axis 2362 in/min.
Simultaneous (X & Y) 4252 in/min.
C axis punching 600 rpm
C axis thread tapping 180 rpm
Max stroke rate punching
(E=0.04 in) 		600 1/min
Max stroke rate marking 13000 1/min.
Tools
Linear magazine 18 tools used with 2 clamps
No. with MultiTool 18-180
Multitool 5/10
Tool change time 0.9 - 3.6 seconds
Accuracy2
Positioning accuracy (Pa) ±0.004 in.
Average repeatability (Ps) ±0.001 in.
Trumpf CNC Bosch PNC-P
Programmable parts chute maximum part size 12 x 20 in.
Dimensions3
Space requirements 269 x 249 in.
Height 90 in.
Laser Data: TruCoax 2000
Guaranteed max. output 2000 W
Adjustable output ranges in 1% steps 100-2000 W
Wavelength 10.6
Beam mode TEM 00
Gating frequency 100 Hz-10 kHz
Laser Gases Premix
Electrical Consumption
Electrical consumption of the entire system 65 kVA


1Without repositioning.

2The achievable work piece accuracy depends on, among other things the type of work piece,pre-treatment,sheet size and postion in the work area. According to VDV DGQ 3441. Measuring length 3 ft.

3Approximate values. The exact data can be found in the latest installation plan.